進口天然氣焊接球閥(德國奧萊斯OLES品牌)

【進口天然氣焊接球閥】詳細說明：

1、可根據管道的施工及設計要求，調整閥體的長短和閥桿的高度。

2、球體的加工精度非常精密，操作輕便，無不良干涉。

3、采用高級的原材料，能保PN25以上的壓力。

4、與同類行業的同種規格產品相比，閥體小，而且外型美觀。

5、現代城市里面的車輛及行人通行密集，道路的情況也非常復雜。

6、所以在施工和維護煤氣供應管道和供熱供應管道時對其施工時間和施工安全的要求非常高。

7、本閥采用全焊接球閥，可以直執著深埋地下。利用工程技術方法施工能大化減少閥門控制所占空間，并且大大節省施工費用及工程時間。而且能預防煤氣爆炸的危險，全焊接球閥是非常安全的閥門。

8、直埋式球閥傳動時，操作者不需要進入地下，只需在地上進行傳動操作即可，非常安全方便。

1. The length of the valve body and the height of the valve stem can be adjusted according to the construction and design requirements of the pipeline.

2. The processing accuracy of sphere is very precise, the operation is convenient and there is no harmful interference.

3. The use of advanced raw materials can maintain the pressure above PN25.

4. Compared with the products of the same specifications in the same industry, the valve body is small and has beautiful appearance.

5. Vehicles and pedestrians are crowded in modern cities, and the road conditions are very complicated.

6. Therefore, in the construction and maintenance of gas supply pipelines and heating supply pipelines, the construction time and construction safety requirements are very high.

7. This valve adopts fully welded ball valve, which can be directly buried deep underground. The use of the latest engineering technology can minimize the space occupied by valve control, and greatly save construction costs and engineering time. And it can prevent the danger of gas explosion. Fully welded ball valves are very safe valves.

8. When the direct-buried ball valve is driven, the operator does not need to enter the underground, but only needs to operate on the ground, which is very safe and convenient.

【進口天然氣焊接球閥】應用：

燃氣用直埋全焊接球閥主要用于城市燃氣：燃氣輸出管道,主干線及各支線供應管道等。集中供熱：大型供熱設備輸出管線、主干線、支線。熱交換機：管道及各回路啟閉。鋼鐵廠：各種流體管道,廢氣擇放管道,煤氣和熱力供應管道,燃料供應管道。各種工業設備：各種熱處理管道、各種工業煤氣和熱力管道。

【進口天然氣焊接球閥】特性：

燃氣用直埋全焊接球閥，不會有外部泄漏等 現象。由于閥座是由碳化特氟隆密封環及咖彈簧構成的，所以對壓力和溫度的變化適應能力強，在標注壓力和溫度范圍內不會產生任何泄滑。球體的加工過程有* 的計算機檢測儀跟蹤檢測，所以球體的加工精度高。由于閥體材料跟管道材質一樣，不會出現應力不均，也不會由于地震及車輛經過地面時而產生變形，管道耐老 化。密封環本體采用含量20%C(碳素)的PTFE材質，保障*無泄漏(0%)。直埋式全焊接燃氣球閥可以直接埋于地下，不用建高大型閥門井，只需在地 面上設置小型淺井，大大節省施工費用及工程時間。